How to Install a Bathroom Fan Going Out the Wall

Things You’ll Need:
out side vent kit.sawzall or 4 inch hole saw,drill,screwdrivers,wire nuts,and caulking
Step 1:
.1. Remove the blower unit from the housing by unplugging it then loosening the three mounting screws and rotating the unit to free it from the screws.

Step 2:
2. Loosely attach housing to ceiling joists or the wall studs if hanging on a wall through keyhole slots in mounting brackets. Keyhole slots in brackets are provided to allow for adjustment to various ceiling thicknesses. Adjust housing so bottom is flush to proposed finished plaster line, then securely fasten housing to joists.

Step 3:
.3.cut an opening in the outside wall for the duct work to go through

Step 4:
4. Snap duct adapter over flanges on housing. Run 3" round duct from housing to wall or roof cap

Step 5:
IMPORTANT: Be sure nothing obstructs the discharge of the fan. Take precautions to assure that insulation does not get into ductwork or fan discharge opening.

Step 6:
Insert blower unit into housing, with stud on mounting bracket on the side near the receptacle. Turn bracket clockwise to lock blower into position, then tighten the three screws. Plug in motor.

Step 7:
Compress spring clips on grille and isert into slots provided in housing. Push grille up flush to ceiling

Technorati Tags: Property http://www.ehow.com/how_2250258_bathroom-fan-going-out-wall.html

Vote Result

Score: 0.0, Votes: 0